What to Do When You Find Mold in Your Glendale Home
Finding mold is a shock, and the first hours matter. This guide explains what to do, in order — and what not to do — so the job stays as small as it can be.
Arrange an inspection
Mon-Fri 7:00 AM-10:00 PM ET | Sat 8:00 AM-10:00 PM ET | Sun 7:00 AM-9:00 PM ET
Call NowTL;DR
- The short answer
- Stop the water if you can find the source, do not disturb the growth, note what you see, take photos, and call to arrange an inspection.
- The rule
- Act in hours, not days. Mold can start growing 24 to 48 hours after moisture arrives.
- What not to do
- Do not scrub it, do not tear out drywall, and do not paint over it.
Step one: stop the water
If the water is still coming in, stop it. Turn off the supply to the leaking pipe, or the main supply to the house if the leak cannot be found. If the water is coming through the roof, the roofer comes first, and a bucket under the drip is the stopgap. Do not wait for the mold provider to stop the water — the plumber or the roofer is the first call, and the mold work follows once the water has stopped.
If the water has already stopped — the leak is old, the stain is dry, the growth is the only sign — there is nothing to stop, and the next step is the inspection. The water that caused the growth may have stopped months ago, and the growth is what is left. The inspection finds the source, even if the source is no longer running.
Step two: do not disturb it
Do not scrub the growth, do not tear out drywall, and do not pull up flooring. Disturbing it releases spores into the air, and without containment they travel through the house. The cleaning that was meant to fix the problem in one room creates it in the rooms around it. Do not paint over it either — the paint covers the stain, and the growth behind it keeps growing. The paint is not a fix, and it makes the inspection harder, because the stain is the evidence.
Leave the evidence in place. The staining, the damp patches and the smell all help the inspection. A wall that has been scrubbed clean tells the inspector nothing. A wall that shows the stain, the damp and the smell tells the inspector where the water went, and how far it reached.
Step three: note it, photograph it, call
Note where the growth is, when you first noticed it, and whether there was a leak, a storm or a flood before it appeared. Take photos of the growth, the stains and the rooms affected. The notes and the photos become the record for the inspection, and for the insurer if the claim is covered. Then call to arrange an inspection, and describe what you see in the order it happened.
The call is the step that starts the work. The provider takes the address, the rooms affected, and when the problem was first noticed, and the inspection is arranged from there. The inspection finds the moisture source, measures the affected area, and sets out the plan. Nothing is removed before the inspection, because the plan depends on what the inspection finds.
What happens next
After the call, the inspection happens. The provider visits, checks the rooms and the spaces behind them, takes moisture readings, and finds the moisture source. The plan follows the source: what will be removed, what will be dried, how long it takes, and what is not covered. Containment goes up where it is needed, affected material is removed, the area is cleaned and dried, and a clearance check confirms the area is dry. The whole job starts with the call, and the call starts with the notes and the photos.
The first week after finding mold
The first week after finding mold is the week the job is made. Day one is the call: the provider takes the address, the rooms affected, and when the problem was first noticed, and the inspection is arranged. Day two or three is the inspection: the provider visits, checks the rooms and the spaces behind them, takes moisture readings, and finds the moisture source. The plan follows the readings, and the provider explains it before any work starts.
The days after that are the work. Containment goes up where it is needed, affected material is removed, the surfaces that remain are cleaned, and the fans and dehumidifiers run until the readings come down. The drying is the slowest part, and it cannot be rushed. The last day is the clearance check, which confirms the area is dry and the affected material is gone.
The week is also when the record is made. The notes and the photos from the first day, the inspection report from the second or third day, and the clearance check from the last day together are the document that shows what was found, what was done, and when. In a rental, or a home sale, or an insurance claim, the record is what both sides rely on.
What not to buy first
The first thing not to buy is a spray bottle. A cleaner that promises to kill mold inside drywall is promising something it cannot do. Bleach cleans the surface of non-porous material and leaves the growth inside porous material. The growth behind the wall cannot be cleaned from the room, because the room is not where it is.
The second thing not to buy is a dehumidifier, before the inspection. A dehumidifier dries the air in the room, and the growth is in the wall cavity, where the air does not reach. The drying that matters is the drying of the cavity, and it happens with fans and dehumidifiers placed by the provider, after the inspection has mapped where the water went. A dehumidifier bought before the inspection dries the wrong place.
The third thing not to buy is paint. Paint covers the stain, and the growth behind it keeps growing. The paint also makes the inspection harder, because the stain is the evidence. The growth needs to be removed, not covered, and the paint comes after the area is dry, not before.
Frequently asked questions
Answers from the questions Los Angeles County homeowners actually ask.
Call NowStop the water if you can find the source, and do not disturb the growth. Note where it is and when you first saw it, take photos, and call to arrange an inspection.
Small surface growth can sometimes be cleaned by the homeowner. But scrubbing releases spores into the air, and bleach does not kill mold on porous surfaces such as drywall or wood. For areas larger than about ten square feet, the EPA guidance is to hire a professional.
No. Paint covers the stain and the growth behind it keeps growing. The paint also makes the inspection harder, because the stain is the evidence. The growth needs to be removed, not covered.
The plumber or the roofer, if the water is still running, because the water has to stop before the mold work can start. The mold inspection follows once the water has stopped.
Where the growth is, when you first noticed it, and whether there was a leak, a storm or a flood before it appeared. The provider takes the address, the rooms affected, and when the problem was first noticed.
Mold can start growing 24 to 48 hours after moisture arrives, according to EPA guidance. Act in hours, not days. A leak dealt with in hours is a drying job; a leak dealt with in days is a mold job.
For a single room, usually no — containment seals off the work area and the rest of the house stays usable. For a job that covers several rooms, the provider will say which rooms need to be avoided. The plan is explained before the work begins.
The EPA notes that mold exposure can cause allergic reactions and respiratory complaints in some people. For health questions, speak with a clinician. For the work, the provider will say whether the room can be used while the work is done.
Note what you cleaned, and when, and take photos of what is left. The inspection still finds the moisture source with moisture readings, and the smell is still the evidence. Do not clean it again before the inspection — the evidence helps the inspector.
In a rental, report the problem to the landlord in writing, as soon as it is found. Then call to arrange an inspection. The written report creates a record with a date, and the date matters.
A room that is used least hides the growth longest, because nobody walks into it and nobody opens the window. Note where the growth is and when you first noticed it, take photos, and call to arrange an inspection. The inspection checks the rooms that are used least, because the growth there has had the longest time to spread.
Mold problem in Glendale?
Call now — we will connect you with an independent local provider for an inspection and a clear plan.
Call Now